RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
85
Port
Members
Check to include the port in the QCL entry. By default, all ports are included.
Key
Parameters
Key configurations include:
Tag
: value of tag, can be
Any
,
Untag
or
Tag
.
VID
: valid value of VLAN ID, can be any value from 1 to 4095
Any
: user can
enter either a specific value or a range of VIDs.
PCP
: Priority Code Point, can be specific numbers (0, 1, 2, 3, 4, 5, 6, 7), a
range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or
Any
DEI
: Drop Eligible Indicator, can be any of values between 0 and 1 or
Any
SMAC
: Source MAC Address, can be 24 MS bits (OUI) or
Any
DMAC Type
: Destination MAC type, can be
unicast
(
UC
),
multicast
(
MC
),
broadcast
(
BC
) or
Any
Frame Type can be the following values:
Any
Ethernet
LLC
SNAP
IPv4
IPv6
Note: all frame types are explained below.
Any
Allow all types of frames
Ethernet
Valid Ethernet values can range from 0x600 to 0xFFFF or Any' but
excluding 0x800(IPv4) and 0x86DD(IPv6). The default value is
Any
.
LLC
SSAP Address: valid SSAP (Source Service Access Point) values can
range from 0x00 to 0xFF or
Any
. The default value is
Any
.
DSAP Address: valid DSAP (Destination Service Access Point) values can
range from 0x00 to 0xFF or
Any
. The default value is
Any
.
Control Valid Control: valid values can range from 0x00 to 0xFF or
Any
.
The default value is
Any
.
SNAP
PID: valid PID (a.k.a ethernet type) values can range from 0x00 to 0xFFFF
or Any. The default value is Any.
IPv4
Protocol IP Protocol Number: (0-255, TCP or UDP) or
Any
Source IP: specific Source IP address in value/mask format or
Any
. IP and
mask are in the format of x.y.z.w where x, y, z, and w are decimal numbers
between 0 and 255. When the mask is converted to a 32-bit binary string
and read from left to right, all bits following the first zero must also be zero.
DSCP (Differentiated Code Point): can be a specific value, a range, or
Any
.
