RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
50
Destination MAC
Address
Calculates the destination port of the frame. You can check this
box to enable the destination MAC address, or uncheck to
disable. By default,
Destination MAC Address
is disabled.
IP Address
Calculates the destination port of the frame. You can check this
box to enable the IP address, or uncheck to disable. By default,
IP
Address
is enabled.
TCP/UDP Port
Number
Calculates the destination port of the frame. You can check this
box to enable the TCP/UDP port number, or uncheck to disable.
By default,
TCP/UDP Port Number
is enabled.
Label
Description
Group ID
Indicates the ID of each aggregation group.
Normal
means no
aggregation. Only one group ID is valid per port.
Port Members
Lists each switch port for each group ID. Select a radio button to
include a port in an aggregation, or clear the radio button to remove
the port from the aggregation. By default, no ports belong to any
aggregation group. Only full duplex ports can join an aggregation and
the ports must be in the same speed in each group.
5.3.3 LACP
This page allows you to enable LACP functions to
group ports together to form single virtual
links, thereby increasing the bandwidth between the switch and other LACP-compatible
devices
.
LACP trunks are similar to static port trunks, but they are more flexible because
LACP is compliant with the IEEE 802.3ad standard. Hence, it is interoperable with
equipment from other vendors that also comply with the standard. You can change LACP
