RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
77
Label
Description
Port
Shows the list of ports for which you can configure DSCP Ingress and
Egress settings.
Ingress
In
Ingress
settings you can change ingress translation and classification
settings for individual ports.
There are two configuration parameters available in Ingress:
1.
Translate
2.
Classify
1. Translate
Check to enable ingress translation
2. Classify
Classification has 4 different values.
Disable: no Ingress DSCP classification
DSCP=0: classify if incoming (or translated if enabled) DSCP is 0.
Selected: classify only selected DSCP whose classification is enabled as
specified in
DSCP Translation
window for the specific DSCP.
All: classify all DSCP
Egress
Port egress rewriting can be one of the following options:
Disable
: no Egress rewrite
Enable
: rewrite enabled without remapping
Remap DP Unaware
: DSCP from the analyzer is remapped and the frame
is remarked with a remapped DSCP value. The remapped DSCP value is
always taken from the '
DSCP Translation->Egress Remap DP0
' table.
Remap DP Aware
: DSCP from the analyzer is remapped and the frame is
remarked with a remapped DSCP value. Depending on the DP level of the
frame, the remapped DSCP value is either taken from the '
DSCP
Translation->Egress
Remap
DP0
'
table
or
from
the
'
DSCP
Translation->Egress Remap DP1
' table.
5.6.5 Port Policing
This page allows you to configure Policer settings for all switch ports.