RGPS-92222GCP-NP Series User Manual
ORing Industrial Networking Corp.
128
5.10 Monitor and Diag
5.10.1 MAC Table
The MAC address table can be configured on this page. You can set timeouts for entries in the
dynamic MAC table and configure the static MAC table here.
Aging Configuration
By default, dynamic entries are removed from the MAC after 300 seconds. This removal is
called aging. You can configure aging time by entering a value in the box of
Age Time
. The
allowed range is 10 to 1000000 seconds. You can also disable the automatic aging of dynamic
entries by checking
Disable Automatic Aging
.
MAC Table Learning
If the learning mode for a given port is grayed out, it means another module is in control of the
mode, and thus the user cannot change the configurations. An example of such a module is
MAC-Based authentication under 802.1X.
You can configure the port to dynamically learn the MAC address based upon the following
settings:
