IGS-9168GP User’s Manual
ORing Industrial Networking Corp
101
are allowed on given objects.
parameters will affect frames received on a port unless the frame matches a specific ACE.
Port Configuration
Label
Description
Port
The switch port number to which the following settings will be applied
Policy ID
Select to apply a policy to the port. The allowed values are 1 to 8. The
default value is
1
.
Action
Select to
Permit
to permit or
Deny
to deny forwarding. The default value
is
Permit
.
Rate Limiter ID
Select a rate limiter for the port. The allowed values are
Disabled
or
numbers from 1 to 15. The default value is
Disabled
.
Port Copy
Select which port frames are copied to. The allowed values are
Disabled
or a specific port number. The default value is
Disabled
.
Logging
Specifies the logging operation of the port. The allowed values are:
Enabled
: frames received on the port are stored in the system log
Disabled
: frames received on the port are not logged
The default value is
Disabled
. Please note that system log memory
capacity and logging rate is limited.
Shutdown
Specifies the shutdown operation of this port. The allowed values are:
Enabled
: if a frame is received on the port, the port will be disabled.
Disabled
: port shut down is disabled.
The default value is
Disabled
.
Counter
Counts the number of frames that match this ACE.
Rate Limiters
This page allows you to define the rate limits applied to a port.