IGAP-420/620/6620 Series
User’s Manual
ORing Industrial Networking Corp. 28
Type:
None:
Select for no security.
WEP:
Select for security WEP.
WPA/WPA2-Personal (per share key):
Select for security
WPA-PSK or WPA2-PSK without a RADIUS server.
Peer AP SSID
Enter the other AP which used for AP mode.
Peer AP BSSID
Fill the Peer AP BSSID (Wireless MAC address) limit client target
Slave Mode
Enable / disable Slave mode
Site Scan
You can scan the APs which used for AP mode in the certainty
area
Security Type
Set the same security with the AP which you want to connect,
AP-client mode only supports WEP and WPA/WPA2 Personal.
Client Mode
In this mode the AP functions as a wireless client to connect to other AP, thus provides
transparent connection between Ethernet & Wireless port. This mode provides no Access
Point services but with 802.1X supported.
Client mode setting interface
The following table describes the labels in this screen.
Label
Description
Peer AP SSID
Enter the other AP which used for AP mode.
Peer AP BSSID
Fill the Peer AP BSSID (Wireless MAC address) limit client target
Site Scan
You can scan the APs which used for AP mode in the certainty
area
Slave Mode
Enable / disable Slave mode
Security Type
Set the same security with the AP which you want to connect.