IGAP-420/620/6620 Series
User’s Manual
ORing Industrial Networking Corp. 18
automatically
Use the following
DNS server
addresses
This option is selected by manually set
Preferred DNS:
There is a default DNS server, and you can input
another new DNS server.
Alternate DNS:
There is a default DNS server, and you can input
another new DNS server.
Web Protocol
Choose on the protocol for web. The default value is
HTTP
, if you
want the web pages’ security is better, choose the
HTTPS
protocol.
Port
Corresponding to the Web protocol, there is a default port (HTTP:
80, HTTPS: 443). And you can enter another number which should
be in range of 1-65535.
Web Access Control
Choose the checkbox of the Wired and Wireless; you can visit the
web page through the mode you choose.
DHCP Server
Enable or Disable the DHCP Server function. Enable
– the AP will
be the DHCP server on your local network
Start IP Address
The dynamic IP assign range. Low IP address is the beginning of
the dynamic IP assigns range. For example: dynamic IP assign
range is from 192.168.1.100 to 192.168.1.200. 192.168.1.100 will
be the Start IP address.
Maximum Number of
IPs
The dynamic IP assign range. High IP address is the end of the
dynamic IP assigns range. For example: dynamic IP assign range
is from 192.168.1.100 to 192.168.1.200.
100
will be entering into
textbox.
Lease Time (Hour)
It is the time period that system will reset the dynamic IP assignment
to ensure the dynamic IP will not been occupied for a long time or
th
e server doesn’t know that the dynamic IP is idle.
