IGAP-420/620/6620 Series
User’s Manual
ORing Industrial Networking Corp. 30
Label
Description
WDS Mode
This mode provides Static LAN-to-LAN Bridging functionality. The
static LAN-to-LAN bridging function is supported through Wireless
Distribution System (WDS).
Peer MAC Address
Set the Mac address of other access point(s). Simultaneity, choose
on “Enable”.
SSID(only Repeater
mode support)
Service Set Identifier Default is the default setting. The SSID is a
unique name that identifies a network. All devices on the network
must share the same SSID name in order to communicate on the
network. If you change the SSID from the default setting, input your
new SSID name in this field.
Channel
Channel 6 is the default channel, input a new number if you want to
change the default setting. All devices on the network must be set
to the same channel to communicate on the network. (
wireless
channel must be the same with the other device in group
)
Security options
Select the type of security for your wireless network at
Security
Type:
None:
Select for no security.
WEP:
Select for security WEP.
WPA/WPA2-Personal (per share key):
Select for security
WPA-PSK or WPA2-PSK without a RADIUS server.
First of all, if APs link with WDS mode, it should obey the following rules:
1. LAN IP Address should set different IP in the same network.
2.
All AP’s DHCP Server should set shutdown.
3. WDS should set Enable.
4. Each AP should h
ave the same setting except ‘Peer Mac Address’ set to the other’s
Mac address
5. At wireless web setting Security and Channel should be the same,
6.
AP’s distance should be limited within a certainty area.
