ORiNG IDS-5011F Series, User Manual

Page: 56 / 59

IDS-5011F Series User’s Manual
ORing Industrial Networking Corp 52.
The following table describes the labels in this screen.
Label Description
Factory Default
Load default configuration except settings of Network. If you want load all factory default,
you should press “ Reset ” button about the five seconds on the device (Hardware restore).
Restore
Configuration
Restore the previous exported configuration.
Backup
Configuration
Export the current configuration to a file.
Upgrade Firmware Upgrade to a new firmware with specified file.
Reboot Device Reboot the device server (warm start).
Table 5-20 Save / Reboot
5.3 Configuration by SSH Console
5.3.1 Connect to DS
You can use SSH Tool (e.g., PUTTY) to access SSH console of DS. The SSH console
interface is shown below.
Figure 5-30 SSH