IDS-4312(+) Series User Manual
ORing Industrial Networking Corp
44
Label
Description
Listen Port
Allows the user to set a new TCP port number to listen on rather
than the default value of the device
Host Start/End IP
If there are more than one destination hosts, specify the IP
address range by inputting a value in
Host Start
/
End IP
. You can
also auto scan the sending port number of the device.
Send Port
Set the send port number.
Management
Access IP Control
Access IP Control List allows you to add or block remote host IP addresses to prevent
unauthorized access. If a
host’s IP address is in the accessible IP table, the host will be
allowed to access the DS. You can check
