20
Revolving the Motor Vertically in the
Yoke
Raise the arm to allow the saw blade sufficient
clearance above the table top. Release the
bevel clamp handle , grasp the saw guard
with the left hand and lift the bevel latch han-
dle. The motor can now be swung to a bevel
position as indicated on the bevel scale. Lock
the motor by engaging the bevel latch han-
dle (possible only at 0
o
, 45
o
and 90
o
) and by
locking the bevel clamp handle.
standard manual
clamp / material stop …. continued
During operations where the arm is swung left
or right could put the clamp in the path of
the blade. If this is going to happen simply
add scrap board that will allow the clamp to
be moved further out on the table and clear
the blade path. (Red arrow 1)
Inset photo: Also pay attention to the
clamping handle and clearance to the lower
guard making sure the clamp does not ob-
struct the guard and hand up, simply pull the
handle gently and rotate the grip out of the
way. (Red arrow 2)
Operating
Instructions
1
2
Bevel Clamp
Bevel Latch
Summary of Contents for 3553
Page 34: ...34 Intentionally left blank ...
