GB
- E 33 -
9600-GB GETR UMDR (353)
TURN GEARING ROUND
2
3
6
7
TD24/95/10
10
9
8
O
U
TD24/95/15
4
4
TD24/95/14
11
-
Change oil filler connections (4) round:
- Screw out connections and screws opposite (5)
and screw in reversed.
With turned-round gearing (11) the oil fill connections
(4) appear in the same position as before.
- Turn gearing round
- Screw up the gearing with the drawbar (2), the cable
routing (6) and the support stand holder (7).
- Swing support stand (8) down and secure : Pos U
- Lower machine onto support stand.
- Attach intermediate shaft to driven side and secure so
that safety device engages in slot:
The locking pin must come out again completely when
released.
- Attach intermediate shaft to gearing stub and secure.
- Slide protecting tube over the joint, fasten and secure
against turning with the chain.