Original inside CAT 310 T CR, Operator'S Manual, Page: 25 / 40

TECHNICAL DATA
337/ TECHN. DATEN 9700-GB
- 25 -
GB
Ihre/Your/Votre
Masch.Nr. / Fgst.Ident.Nr.
Position of Vehicle Identification Plate
The factory number is imprinted on the accompanying Vehicle
Identification Plate (as shown) and on the frame. Guarantee
issues and further inquiries cannot be processed without the
factory number being stated.
Please enter the number onto the front page of the operating
manual immediately after taking delivery of the vehicle/implement.
Defined use of the mower
The Rotary Mower " CAT 310 T" is intended solely for normal use in agricultural work:
• For the mowing of paddocks and field forage.
Any other uses are regarded as not included in this definition.
The manufacturer is not liable for any damage resulting from this. The user carries sole risk.
• Keeping to the maintenance and servicing conditions stipulated by the manufacturer is also included in the defined use.
Technical data
CAT 310 T
General
Length (transport) ...................................... 5180 mm
Width (transport) ....................................... 3000 mm
Height (transport) ...................................... 1910 mm
Length (work) ............................................ 4870 mm
Ground clearance (transport) .................... 380 mm
Height (work) ............................................. 1450 mm
Weight ....................................................... 1950 kg
Tyres ......................................................... 10-80/12.3
Tyre pressure ............................................ 2 bar
Attachment ................................................ Lower link Kat.II
Tractor capacity ......................................... from 59 kW (80 PS)
Driving motor speed .................................. 1000/540 r.p.m.
Continuous noise pressure level ............... 91.1 dB (A)
Necessary connections
• 1 double-action hydraulic connection
pressure min.: 140 bar
pressure max.: 180 bar
• 1 single-action hyfraulic connection
pressure min.: 140 bar
pressure max.: 180 bar
• 7-pole electric connection for lighting (12 Volt)
• 3-pole electric (12 Volt) connection (see supplement)
Cutter bar
Cutting width ............................................. 3050 mm
No. of mowing drums ................................ 4
Cutters per mowing drum .......................... 3
Cutting height ............................................ 25-50 mm
Mowing drum r.p.m. .................................. 1886
Horizontal rocking ..................................... +5.5°
Longitudinal rocking .................................. ±3.5°
Vertical adjustment in the work position .... ±100 mm
Processor
System ...................................................... Finger (V-form)
Width ......................................................... 2240 mm
No. of tines ................................................ 62 double-finger
Rotor r.p.m. ............................................... 860
Rotor diameter .......................................... 600 mm
Swath width ............................................... 900-1400 mm
M o dell
A . P ö t t i n g e r M a s c h i n e n f a b r i k G e s . m . b . H .
A - 4 7 1 0 G r i e s k i r c h e n O b e r ö s t e r r e i c h
M a s ch . N r.
Ty p e G e s . G e w .