gripper roller & stacked in a collection tray. Stacked papers should be frequently
removed from the collection tray.
Maintenance
General Precautions
Cover the machine when not in use
While cleaning the parts with water or kerosene take care not to let it enter the bearings
Do not let them rest on the working edge of cutter.
While not is use
If the machine is not going to be used for more than 2 days or more,
Apply grease to feeder shaft, swelling bar, gap setting screw, main pulley’s shaft, and
other parts which can get rusted
Relies the gripper rollers pressure on the Roller no. 4 in such a way that no roller no.4 &
grippers will coincide with each other.
Daily Maintenance
Oiling at all points marked with red paint.
Clean the rubber rollers using Kerosene and water. Take care not to spill Kerosene or
water in the bearings
Clean the dust deposition using a wet cloth. While cleaning the machine, rotate it
manually using hand wheel, and do not use the electric motor drive.
Weekly Maintenance
Remove the machine covers and grease all the gears.
Monthly Maintenance
Check belt tensions
Replace belts if they are worn out
15
Summary of Contents for OCM 20
Page 12: ...12...
