3 Preparation
－
10
－
3.2 Names and function of parts
The following describes the names and functions of individual components of the
driver.
For detailed information of each unit, see the page shown in the square bracket.
Driver model:
AXHD15K
,
AXHD30K
,
AXHD50K
Motor connector (CN3)
Connect the motor cable.
LED
Lights up when current is applied.
When the protection function has
been activated, the cause of the
activated protection function is
indicated by the number of flashes.
Power connector (CN1)
Connect the power cable.
Installation holes
(2 positions)
Installation notch
(2 positions)
Input /output signal connector (CN2)
Connect the input /output cable to be linked
with the external controller and others.
Internal speed potentiometer
Used to set the motor speed.
The speed is set to 0 r/min
at time of shipment.
Driver model:
AXHD100K
Installation notch
(2 positions)
Installation holes
(2 positions)
Motor connector for power (CN4)
Connect the motor cable.
Motor connector for signal (CN3)
Connect the motor cable.
Internal speed potentiometer
Used to set the motor speed.
The speed is set to 0 r/min
at time of shipment.
Input /output signal connector (CN2)
Connect the input /output cable to be linked
with the external controller and others.
LED
Lights up when current is applied.
When the protection function has
been activated, the cause of the
activated protection function is
indicated by the number of flashes.
Power connector (CN1)
Connect the power cable.
[P.19]
[P.19]
[P.18]
[P.18]
[P.18]
[P.25]
[P.20]
[P.27]
[P.25]
[P.20]
[P.27]
