Flow of Implicit communication
3 I
38
1
Flow of Implicit communication
is the title name described in the reference destination.
The contents of
are explained in this manual.
Refer to the
AZ
Series OPERATING MANUAL Function Edition for the contents of
.
Be sure to turn off the main power supply and control power supply of the driver before setting the
switch. Setting the switch while the main power supply and/or the control power supply are in an
on-state will not enable the new setting.
Install and connect the motor and the driver.
Set an IP address.
Set the home.
Set the coordinate and the resolution.
Assign the remote I/O.
Select the operation method and set data.
Set parameters.
Make settings concerning information and
alarms.
Completion of setting
Direct data operation
Stored data (SD) ope Sequence function
Macro operation
Return-to-home operation
2 Hardware
2 Hardware
3 Implicit communication
4 Parameter ID lists
5 Troubleshooting
3 Implicit communication
2 Operation
1 Before starting operation
2 Operation
Summary of Contents for A Step AZ Series
Page 14: ...1 Introduction 14 ...
Page 64: ...3 Implicit communication 64 ...
