8
Installation of your Oricom Radio
Fitting the Controller Speaker Microphone
The controller speaker microphone uses a 6-pin telephone style plug
and socket:
1. Position the microphone plug so the plastic flap faces upward, and
insert the plug into the socket until it ‘clicks’.
2. Gently press the rubber boot into the hole surrounding the socket
so that the slot around the boot fits neatly inside the rim of the entry
hole.
Disconnecting the Controller Speaker Microphone
It is recommended that the Controller Speaker Microphone be left
permanently connected to the radio, but if it must be disconnected,
proceed as follows:
1. Lift the rubber boot and the lip of the raised area on the front panel.
2. Ease the rubber boot out of the cable entry hole and slide it along the
cable away from the front panel.
3. Identify the plug locking lever, and move the lever towards the plug
body. At the same time gently pull the plug from the socket.
OR019523 - UHF182X user manual_09-17-20.indd 8
2020/9/17 11:22:46
