25
Operations
Priority Channel Set
A priority channel can be stored in the menu.
The letter "P" will appear when the selected channel is set to Priority.
This channel will then be automatically monitored during the Priority
Scan.
Note: You can only store one channel as your priority channel.
Scan resume time
If 5,10, or 15 sec is selected, SCAN will start again after 5,10, or 15
second pause even though a signal is still present.
If P5 is selected, SCAN will stop as long as a signal is present and will
resume SCAN again 5 seconds later.
Busy channel Lock
If the channel is already in use, you can prevent the UHF CB radio from
transmitting. This is particularly important when using CTCSS/DCS.
Key Beep
The Beep tone emits a tone when you press any of the buttons on the
microphone (except PTT button).
Roger Beep
This function emits a beep on the communication party to inform that
the transmission is finished.
You can select 5 different roger beep tones in the menu.
Melody call
You can select 5 different melody tones. This is the tone that is emitted
when the PTT is pushed and your press "TW/MENU" button within 1/2 a
second.
OR019523 - UHF182X user manual_09-17-20.indd 25
2020/9/17 11:23:01
