18
Operations
MW (Memory write channels)
The memory write button is used to store a channel in the memory
location M1 to M5.
To store channels:
• Select the desired channel with rotary knob.
• Press and hold MR/MW button.
• Select the location you would like to store the
channel by pressing M1, M2, M3, M4 or M5.
TW (Triple Watch Function)
Pressing the TW/MENU button activates the Triple watch function.
The Triple Watch feature allows for monitoring of 2 or 3 channels.
The currently displayed channel and 2 more channels saved in TRI1 and
TRI2.
To store the channels in TRI1 or TRI2, select the channels and features
CTCSS/DCS/Duplex on the display then enter menu mode and save the
channel in TRI1 or TRI2.
If only one additional channel is required, then select "Off" in TRI2.
Once Watch is activated, by pressing the TW/MENU button, the TRI1
and TRI2 channels are checked in the following sequence. Main channel
is checked for 0.7 of a second, the TRI1 for 0.15 seconds, TRI2 for 0.15
seconds and then back to the Main channel.
The sequence is repeated until a signal is detected or radio is switched
off.
If there is a signal present on TRI1 or TRI2, The radio will wait on that
channel for 5 seconds after the signal is no longer present, then revert
to Tri Watch operation.
Triple Watch can be disabled by pressing any key.
Press and hold
OR019523 - UHF182X user manual_09-17-20.indd 18
2020/9/17 11:22:56
