26
Operations
Current regulations require calling tones to be restricted to one
transmission per minute.
If a second transmission is attempted within one minute, then an error
tone will sound.
Squelch Tail
Squelch tail is the noise heard after the transmitting party release the
PTT and is heard by the receiving party.
If Squelch Tail is turned On, on both radio this squelch noise will be
muted.
Auto Power Off
This feature allows the radio to be connected directly to the battery of a
vehicle and when enabled, will automatically turn the radio off, if it has
not been used for a preset period of time 1, 2 or 4 hours.
The main purpose of the feature is if the radio is inadvertently left on
when directly connected to the battery it automatically turns the radio
off to prevent the battery from being discharged.
Software version display
The currently used software version display.
Factory Reset
If the radio's display locks up or stops functioning properly, you might
need to reset your UHF radio.
Caution: this procedure clears all the information you have stored in
your UHF radio.
Before you reset your UHF radio, try turning it off and on again.
If your UHF radio is still not functioning correctly you may need to reset
the UHF radio.
To reset, press and hold "PRI/MON" button and power on.
OR019523 - UHF182X user manual_09-17-20.indd 26
2020/9/17 11:23:01
