The Answering Machine
25
1.
Press
for 2 seconds.
2.
Start recording after the beep.
3.
Press
to stop recording or recording will stop after 2 minutes. The recorded memo
will play back automatically for review.
Playing the memo
1.
Press
during standby.
2.
Press
to stop playback or it will stop when the memo is finished.
Deleting the memo
1.
Press
during memo playback. The memo is deleted.
CALL SCREENING
Call screening allows you to hear the caller while they are is leaving a message. You can then
decide if you want to talk to the caller directly.
1.
Press
during standby.
The answering machine emits one beep for On, and two beeps for Off.
MESSAGE ALERT
Message alert gives you an indication that you have new message(s) saved in the answering
machine. You will hear a short beep periodically.
1.
Press
during standby.
The answering machine emits one beep for On, and two beeps for Off.
ADJUSTING THE PLAYBACK VOLUME
You can adjust the volume of call screening and message playback.
1.
Press
to increase or decrease the volume.
SETTING RING DELAY
Ring delay is the number of rings your phone will ring before the answering machine picks up the call.
This setting only applies when your answering machine is switched on. You can change this setting to
2 – 7 rings or toll saver.
NOTE:
Deleted memo cannot be recovered.
TIP:
For better audio quality, speak into the microphone of the base unit when
recording.
TIP:
The memo will also playback when you are listening to the ICM.
