GB
24
To send all selected settings and preferences to the
watch select “Transfer configuration” in the “communication”
sub-menu (PC software).
DOWNLOAD DATA
Follow these procedures to download data
1. After installing the CD-ROM click the OUTBREAKER icon
on your PC.
2. In the main menu, select “Communication”.
3. Connect the docking station to your PC.
4. Press “Mode” until you reach PC Mode.
5. Fit the OUTBREAKER watch in the docking station, making
sure the pins are matched and secured.
6. Select “Connect” in the “Communication” sub-menu.
7. You will see an arrow mark on the watch, and “download in
progress” on your PC.
8. Select “Read Trip Data” in the “Communication” sub-menu,
then follow the on screen instructions.
9. Select “Format” to process the data arrangement.
10.Download is now complete. Select desired graphical report.
NOTE
EFFECTIVE USE AND RANGE
The heart rate and chest belt have a maximum transmission
range of about 76 centimeters (30 inches). If the signal is weak
take the following steps:
• Shorten the distance between the heart rate chest belt and
watch
• Re-adjust the position of the heart rate chest belt
• Check the batteries. If they are low or exhausted, change the
battery immediately
You can wear the receiver watch on your wrist or strap it to a
bike or exercise machine as shown below:
AQUATIC AND OUTDOOR ACTIVITIES
The watch is water-resistant up to 30 meters. The chest belt and
other accessories (bike mount/speed and cadence sensors)
are splash-proof, but should not be worn for underwater activi-
ties, as the heart rate transmission cannot work properly under
water. Refer to the table below for guidelines.
