GB
12
SET ALTITUDE ALERT
The watch can be set to remember an altitude limit (either up or
down, but not both simultaneously). If the alarm is activated, a
series of beeps (at 5 second intervals) will sound, and the whole
LCD display will flash, when you breach the limit. To end the
alert, press any button.
To activate or deactivate the alert and set its direction:
To set the altitude alert value:
RECALLING ALTITUDE DATA
The OUTBREAKER allows you to track the following informa-
tion as you exercise.
• Max / min altitude attained -- shows the highest or lowest
point you have reached so far in relation to your watch’s
permanent altitude setting.
• Max / min altitude accumulated – represents the total dis-
tance you have ascended or descended; that is, every
incline is added together or ‘accumulated’, and likewise
every decline is added and ‘accumulated’, to give a total.
• Vertical speed -- how fast you are currently climbing
• Max ascending speed – fastest speed you have climbed
• Max descending speed – fastest speed you have descended
Clearing the memory allows you to start over again on
a new trip, though all the information from your current trip will
be lost.
SWITCH BETWEEN VIEW OPTIONS
While in ALTI Mode, press to
switch between the view options:
Altimeter/Clock, Altimeter/Local
pressure, Altimeter/STW and Altimeter/
Temperature.
NOTE
Diagram
Instructions
1. Press FUN/SET 2 times until you reach the Alarm
screen. Display reads 'AL' (off) or 'AL' (on) at the
bottom)
2. You may set the arrow at the bottom of the screen
to a
ascending, or descending limit (but not both).
To change direction, press ST/SP/-.
3. Press to turn the alarm on or off.
Diagram
Instructions
1. Press and hold FUNC/SET for 2 seconds, then
press or ST/SP/- to change the altitude
limit.
