13
GB
Diagram
Instructions
1. While in BARO Mode, press FUN/SET until the
SEA (sea pressure) screen is shown.
2. Use or ST/SP/- to change the value.
The value will change in increments of 1 hPa or
.03 inHg, depending on the watch you purchased.
3. Press FUN/SET again when finished.
ADDITIONAL VIEW OPTIONS
While viewing the ALTI/Clock display,
press FUN/SET to switch between ad-
ditional view options: max and TOTAL -
TTL (accumulated) ascending altitude
(press to show max and
accumulated descending altitude), alti-
tude alarm, current vertical speed and
clock (use to show current vertical speed and
stopwatch), and max vertical speed (press for max
descending speed).
To clear a value from the memory, press and hold FUN/SET for
2 seconds.
BARO MODE (TS110/TS130 ONLY)
A unique feature of the TS110/ TS130 BARO Mode is that
it enables you to view sea level pressure history for the
past 24 hrs.
SET THE SEA-LEVEL PRESSURE
Sea level pressure can change relative to location. To achieve
accurate altitude readings, set the sea-level pressure value
before every trip. Check the newspaper, local news station,
trail marker, or weather forecast for local readings, and always
select the reading nearest to your present location.
