6
GB
HOW TO SET AND ARM THE
ALARMS
The RM318P has two alarms, ALARM 1 and ALARM 2.
They can be invoked together or independently.
To set an alarm :
1. Press [
] once to select ALARM 1 or again to
select ALARM 2. The last selected time of the alarm will
be displayed. If you have never set the alarm before, the
time will be displayed as 0:00.
2. Press [
] for three seconds. The hour digits will
blink.
3. Enter the hour using [
] and [
] .
4. Press [
] . The minute digits will blink.
5. Enter the minutes using [
] and [
] .
6. Press [
] to exit. The ALARM ON ICON for
the alarm chosen will be displayed indicating the alarm
set above is now armed.
You can also arm or disarm an alarm by pressing the
[
] BUTTON.
When an alarm is armed, it will go off at the set time. The
display will light up for 10 seconds with the ALARM ICON
flashing.
The four-step crescendo function allows the alarm to start
off gently and step up its intensity every 20 seconds for four
times. Without interruption, the alarm will go off for a total
of two minutes.
If a second alarm goes off when the first alarm is sounding
off, the first alarm will be disabled automatically.
HOW TO STOP AN ALARM
To stop an alarm, you can use either of the three buttons:
[
] , [
] or [
] .
Pressing [
] during an alarm will
invoke the SNOOZE FUNCTION, which will stop the
alarm and let it sound off again after eight minutes.
Pressing [
] will stop the alarm, which is still
armed and will go off at the set time the following day.
If [
] is pressed instead, the alarm will be stopped
and deactivated all together.
HOW TO RESET THE UNIT
There is a RESET BUTTON embedded into the battery
compartment. It allows you to return all settings to its
factory values, which are 00:00:00 for time and 1-1,
Monday, for date.
To use the RESET BUTTON :
1. Slide open the battery compartment.
2. Use a blunt stylus to press the RESET BUTTON once.
