Using your Ice Shaver
Warning
Caution
Caution
1.
※
2.
3.
4.
5
Before First Use
Rinse and dry the parts under the main body thoroughly
Refer to "Care, Cleaning and Storage" (Pg. 9-10), disassemble,
rinse and dry the parts under the main body.
Do not immerse the main body into water.
It will cause breakdown.
Insert the batteries
Take the battery compartment out from the back of
the main body.
Push the grip of the battery compartment lid from the
back of the main body, open the lid and take out the
battery compartment.
▪ Check carefully for the electrical polarity
of the battery If inserting the batteries
wrongly, it will not only stop the operation,
but it will also cause battery leakage and
breakdown.
▪ Do not put the battery compartment on
the metal Metal plates are located on the
outer surface of the battery compartmnet.
It will cause electrical short.
Insert the batteries to the battery compartment
Prepare 4 pieces of AA Alkaline Batteries sold in the
market. Insert the batteries according to the illustrations
marked on the battery compartment.
After inserting the batteries into the battery
compartment, put the battery compartment back to
the main body When returning the battery
compartment to the main body, return it by putting the
metal plates of the battery compartment onto the 2
pieces of springs inside the main body.
Close the battery compartment lid
Snap the 2 claws of the battery compartment lid into
the upper part of the battery. compartment and close
the lid. Make sure that the lid is closed by pushing the
grip.
▪ Make sure that the battery compartment lid is closed
If the lid is not well closed, the batteries will drop out
when using. It will cause accidents.
▪ If the battery compartment lid cannot be closed or
the battery compartment is hot, take the battery
compartment out and repeat from Step 2.
Please check if the batteries are inserted correctly
and if unrelated item is found inside the compartment.
Please note that the lid may sprang open when
pushing the grip of the lid.
Grip of Battery Compartment Lid
Battery Compartment Lid
Battery Compartment
Metal plates
Springs (2 pieces)
Claws of the battery compartment
Space for inserting
the battery compartment
The side that has a spring is negative
