background image

Do not shave ice that contains alcohol with this appliance.

It will cause damage to the appliance.

Cautions- when putting ice into the ice chamber

182×257mm(B5)

2016.09.26

PANTONE186C

K

The following situations may happen during the ice-shaving

Caution 

Remove the 

    main body

●The surface inside the ice chamber must be flatten before installing the main body.
Otherwise, main body cannot be closed.
● Do not use the ice cubes sold in supermarkets and convenience stores.
It will cause breakdown.

Shake the ice 

    chamber

Move the 

ice cubes

D160928

15mm

The appliance must rest for 30 seconds or above when it is used for ice-shaving 

continuously.

Solutions

Release the switch and press it again when facing both situations.

If the problem is not solved, remove the main body from the ice 

chamber, shake the ice chamber to let the ice cubes move, or take 

out one ice cube. Then install the main body again and press the 

switch. If the problem is still not solved, change to new AA Alkaline 

batteries (4 pieces).

● The appliance may produce a loud noise and stop operation when the 

ice is jammed. But note that it is not a breakdown.

● When there is only a small amount of ice and the areas of ice that the 

blades can touch become smooth, the amount of ice shaved will 

decrease.

Limit for the 

amount of ice 

stored

Main body 

cannot be 

installed if the 

limit is 

exceeded.

Summary of Contents for DOSICE17













Reviews: