Troubleshooting Guide
11
Warning
This applicance must be disassembled and repaired by qualified technicians only.
Please refer to below checklist when you encounter problems of your appliance.
Problem
Possible Causes
Solutions
The appliance is not
operated even
pressing the switch.
Sound can be heard
from the appliance
but no ice is shaved.
The speed of iceshaving is
slow.
The operation stops during
the process of ice-shaving.
To inspect your ice slicer frequently if it has been used for a long period of time
Keep the surface inside the ice chamber
as flat as possible.
▪ The surface inside the ice chamber is
not flat.
▪ The remaining ice of previous usage is
left in the ice
▪ The ice is jammed inside the ice
chamber.
▪ Blades cannot work smoothly and
touch the ice
▪ Only a small amount of ice is left in the
ice chamber.
▪ The areas of ice cube that the blades
can touch become smooth.
▪ Too much ice.
▪ The ice is jammed inside the ice
chamber.
Adjust the amount of ice within the limit.
Release the switch and press it again.
If the problem is not solved, remove the
main body from the ice chamber. Shake
the ice chamber to let the ice cubes
move, or take out one ice cube. Then,
install the main body again and press
the switch. (Refer to Pg. 7)
The main body cannot be
attached to the ice chamber.
▪ Too much ice.
Reduce the amount of ice and adjust the
amount within the limit.
Check if the electrical polarity is matched
correctly (Refer to Pg. 5).
Metal Plates must be matched with the
springs in the main body when installing
the compartment (Refer to Pg. 5).
Install correctly.
* The appliance will not operate with the
main body only.
▪ The main body is not attached
correctly to the ice chamber.
▪ Batteries are not put correctly chamber.
▪ Battery compartment is not installed
correctly.
▪ Battery life has ended.
Change and use new ice (Refer to Pg. 7
and 8).
Put ice into the ice chamber.
▪ No ice is put inside the ice chamber.
Change and install a new battery.
Does it have below problems?
▪ Battery compartment is abnormally hot.
▪ It has burnt smell.
It has other defects and breakdown.
When your appliance has these problems, stop
using it immediately to avoid accidents. Remove
the batteries and consult with the supplier for
inspection.
