8
Caution when loading and unloading
z
When loading or unloading using a truck, proceed carefully and be certain to park on a flat and
safe surface. A truck moving suddenly could cause injury and accidents.
z
Attach a gently sloping ramp securely to the truck’s loading platform and lower the running of
the engine. The speed change lever should be put in the forward [1] position for loading, and in
the reverse [R] position for unloading.
z
This machine’s holding carrier should be empty before loading on to a truck. Furthermore, the
machine should not be loaded on to a truck with its holding carrier in the dump position.
Before operating the machine
z
Absolutely do not try to modify this machine (including modification of the protective cover and
safety cover) as this can cause injury and accidents. Altering this machine in any way will void
the warranty. Orec America Inc. will bear no responsibility for damage or injury caused by
alteration or modifications.
z
Do not change or tamper with the safety apparatus. Inspection should be performed
periodically to ensure the safety apparatus is working correctly.
z
This machine is not a vehicle for people. Do not allow any adults, children or pets to ride on it.
Riding the machine can result in injury and damage.
z
Wear suitable clothing when operating this machine. Please wear the following items to protect
against injury and reduce the possibility of accidents.
Long sleeves, long pants Protective glasses
Non-slip shoes Gloves
Helmet Ear protection
Cuffs, loose clothing, and jewelry can become entangled in the machine. Avoid wearing such
items to help prevent injury and accidents. Long hair should be tied up inside a helmet.
z
Ensure that no part of your body comes into contact with the moving parts of this machine.
There is the possibility of serious injury such as the severing of hands and feet if the machine’s
moving parts are touched.
z
Do not remove any parts of this machine that have been fitted as standard. To prevent
accidents, be sure to use all covers and parts in the same state as they have been fitted.
z
Be sure that there are no people, animals or vehicles close by. Not taking precautions can
cause injury and accidents.
z
Before starting operation, remove any obstacles such as rocks and branches from your work
area. The machine or you yourself could slip and fall over during operation, causing injury and
damage.
z
When working in a dangerous area, erect markers stop to you from mistakenly getting too near
to obstacles, ditches, soft path edges, slopes (over 20°), or uneven ground.
z
Use this machine during daylight or with sufficient artificial light. Do not operate this machine
at night when poor visibility will not allow you to be fully aware of your surroundings. Failure to
notice dangerous objects and bystanders is a cause of injury and accidents.
z
Absolutely do not operate this machine in places where there are dangerous drops, ditches or
embankments. Accidents can be caused by the machine tipping over.
z
Do not use this machine on wet grass. It is easy to slip on wet grass, causing injury and
accidents.
z
Inspect the drive sprockets, crawlers, and tension rollers to be certain they are properly
attached. Securely tighten if they are loose.
WARNING
WARNING
