16
Replacement
3.
Please prepare a suitable container in which to receive waste
oil.
4.
Remove the oil drain plug which is located on the back part of
the engine and allow oil to drain out from inside the crankcase.
5.
Make sure you securely reattach the drain plug.
6.
Refill with new engine oil up to the designated level. (See page 34, Specifications.)
z
Use high-quality engine oil that is of SD level and above. Refer below for how to determine oil
use depending on outside temperature. Also see below for a rough estimate of the times when
oil should be replaced.
Engine oil
SAE10W-30
Replacement
1
st
time : after 5 hours
2
nd
time onwards : every 50 hours
è
However, please replace more frequently if continually carrying heavy loads or working in
particularly high temperatures for extended periods of time.
Transmission oil inspection, replenishment and replacement
Inspection / replenishment
1.
Manually put the carrier in the dump position.(See page 16,
How to operate the carrier dump.)
2.
Remove the filler cap from the top part of the transmission
case (oil caps are located on both sides.)
3.
Check the oil level and clarity by looking through the filler
opening. If not at the regulation level, replenish or
completely replace oil (refer below) if noticeably dirty.
4.
Securely reattach the filler caps on both sides of the
transmission.
5.
Lower the carrier.
z
Also remove the oil filler cap/dipstick to allow oil to drain
out more easily.
Filler cap
NOTICE
NOTICE
