14
CAUTION
Working of Each Part
(1) Drive clutch lever
Intermittently puts power into the transmission from the engine.
Lower this lever to drive and release it to stop.
When in the stop position, the parking brake is also locked at the same time.
(2) Shift rod
Use this to select a drive speed.
There are 2 forward gears, (Forward 1) and (Forward 2), and 2 reverse gears, (Reverse 1) and
(Reverse 2).
To change gear, put the drive clutch lever in the [Stop] position and proceed when the machine
has stopped.
z
If you try to operate the gear lever with the drive clutch lever in the drive position, this is not only
dangerous but can also damage the gears inside the transmission.
(3) Platform stopper (manual)
Use to dump the carrier.
Grip the lever and raise it up.
(4) Side clutch lever
Use this lever to change the direction of travel.
Grip lever and turn the machine in the desired direction.
z
Before operating the side clutch, sufficiently reduce the machine’s speed of travel and move the
lever gently a little at a time. Operating this lever at high speed and turning sharply is extremely
dangerous.
(5) Throttle lever
Use this to adjust engine revolution up or down.
WARNING
