9
Outgoing by Preferred Line
Allows you to elect which line you use to make an out going call.
Lift handset and dial either:
#1 for Line 1
or
#2 for Line 2
Power Failure
In the event of power failure, all calls on line 1 will ring on extension 1.
If you need to also receive calls on line 2, plug a telephone into 1 of the 2 line
sockets, located to the right hand side of the rear panel.
Fix a Time limit for Outgoing Calls.
Individual or ALL extensions can be limited from 1 minute to 99 minutes for
each Outgoing call, this is a useful feature if your Calls provider offers Free
Calls
but limits them to a certain time .
To make sure you are within any required time limit the actual time allowed is
reduced by 20 seconds.
Example 1 : To limit ALL extensions to 3 minutes per outgoing call;
Extn. 1 Dial * # 30 03 #
Time
To remove 3 minute limit for ALL extensions:
Extn. 1 Dial * 3 000 #
Example 2 : To limit extensions 5 and 6 to 60 minutes per outgoing call;
Extn . 1 Dial * # 3 5 60 # * # 3 6 60 #
Ext Time
To remove 60 minute time limit for Extns 5 and 6
Extn. 1 Dial * # 3 5 # * # 3 6 #
How to use BT or Cable network services
In order to use network services eg; Call Divert you need to Dial # 1 in front of
the activation code ie; # 1 * 21 * etc. To deactivate the service dial # 1 # 21 #
etc.
If you need to use line 2 to set up the Networks services dial # 2 infront of the
activation code.
To access individual lines
When you go Off Hook you will automatically be connected to Line 1, however
if you need to make a call on line 2 , dial # 2 then the number.
Summary of Contents for PBX 206
Page 1: ...1 Model PBX 206 User Guide ...
Page 10: ...10 ...
