2.
Plug the charger into an electric
socket.
If this is the first time you are charging the
device, you should charge the battery in the
Base Unit for at least eight hours. After this
initial charge, the battery requires at least
four hours of charging time, if it has been
completely depleted.
A fully charged battery should work for up to
four hours of constant use and can remain in
Suspend mode for as long as twenty-four
hours.
Each time the device is connected or
disconnected from charging, it vibrates. This
is to ensure that you are aware that the
device has been connected or disconnected.
When the device is activated from Suspend
mode, it informs you how much battery
power remains.
Turning the OrCam Device On or
Off and Suspending
Before you turn the OrCam device on or off
it is recommended that you wear your
OrCam device so that you hear the system
messages.
To turn your OrCam device on or
off:
3.
To turn the device on, press the
POWER button on the Base Unit.
The device vibrates. During the
first minute of powering on, you
should hear continuous beeping
sounds. After approximately one
minute you will hear, “OrCam
Version 8 is ready. Battery is [this
many] percent charged.”
