11. Pull them tightly, so that the mount
is secured.
12. When straps are pulled all the way
through, carefully cut off the
remains close to the mount to
prevented possibility of scratches
and to ensure it looks aesthetic.
The mount is now attached to the glasses
frame and can be left there permanently. The
glasses frame can be folded with the mount
in place.
Note:
If you prefer to attach the Head Unit on
to the left arm of the glasses frame, you will
need to have the mount straps facing down
during the assembly process. This will
ensure the magnets are properly aligned
with those on the head unit.
Attaching the Head Unit to the
Mount
The Head Unit is designed to be connected
to or disconnected from the mount as often
as you require. The connection between
them is made through a pair of magnets on
both parts.
1.
Attach the Head Unit onto the
mount.
2.
Verify the camera points straight
forward relative to the arm of the
glasses frame.
3.
Put on your glasses.
4.
Verify that the camera is aligned
with the line of sight of your
glasses.
5.
Extend your arm straight forward
in front of your face. Point your
finger upwards. If you hear a high-
pitched double-beep, the device is
placed correctly.
Note:
If the device’s camera is angled too
high or too low, the OrCam camera may not
be accurately triggered, or may not perform
properly.