Orca UVpro V-LAB, Operating Instruction

Page: 14 / 30

Recirculating Air Disinfection System V-lab
orca GmbH www. uvpro .de Seite 12 von 28
4. COMPONENTS OF THE SYSTEM
UV pro V-LAB Recirculating Air Disinfection Systems are inspected visually and measured electrically
before delivery. The screw joints and O-rings are pre-assembled and inserted accordingly. The UVC
tubes are already mounted when delivered. While unpacking, you should verify the completeness of
the delivery in view of the bill or Figure 2.2. Please inform us about damages (like broken glass) or
missing components.
Please check the receipt of the shipment to ensure it is complete. If any parts are
missing or incorrectly fitted, system cannot be used under any circumstances.
The
UV pro
V-LAB Recirculating Air Disinfection System consists of the following components:
Recirculating Air Disinfection System
UV pro V-LAB
ITEM DESCRIPTION ITEM NUMBER
Irradiation chamber including supply unit, union rings and
retaining clips for the tubes,
reflector, fan, 2 visual protections with lamellar structure
and 5 m cable
V-LAB
pre-assembled
2 x UVC-radiation source, Type UV pro N30-2
2 x UV pro N30-2
Installation instructions
The UV pro V-LAB has been carefully inspected and passed a function test before shipping. The high-
quality packaging should prevent damage in transit. However, even with the most careful handling
damage cannot be avoided completely. The UVC-tubes made of quartz glass are most susceptible to
damage during transportation. Check the UVC tube and the tube socket prior to installation. Check if
the cables are damaged. We recommend that you check the completeness of the delivery against the
parts listed above.
The UV pro V-LAB Recirculating Air Disinfection System weighs about 13 kg. Choose a suitable wall
segment or bracket that is able to carry the additional weight.
It is necessary to note, that people and animals must be protected from UVC radiation
during installation. Also, consider possible body heights of >2 m.