Orca UVpro V-LAB, Operating Instruction

Page: 15 / 30

Recirculating Air Disinfection System V-lab
orca GmbH www. uvpro .de Seite 13 von 28
Tube change
Take into account the following assembly steps, so you can avoid damage and allow a
long-standing function of your disinfection system.
The biggest risks in the assembly of UVC units are damage to the vitreous body and bending or twisting
the connection pins in the tube sockets. Please adhere to the following installation instructions, so you
avoid the damage to the system.
Abbildung Beschreibung
Switch of the unit and disconnect it from its power source. Place it on a flat
surface and remove all four screws of the right cover.
The easiest way to open the cover is to grip through the ventilation hole and
drag the extreme front corners carefully.
Now the visual protection can be removed. Pull it up for removal on the ends
of the slats.