LRD-200B Low-Rate Demodulator
LRD-200B Low-Rate Demodulator.
©
Copyright 2012, Orbital Systems, Ltd.
Revision B.03
26
3.1.3
Setup Buttons
Two (2) setup buttons are used to configure the LRD-200B (see Figure 13).
Figure 13 - Setup Buttons
•
The upper setup button is used to select the operating parameter (see
Figure 14). The operating parameter functions are described in Table 3.
•
The lower setup button is used to select the parameter option (see Figure
14).
•
Simultaneously pressing and holding both the upper and lower setup
buttons sets all configuration parameters to default values.
If the setup buttons were disabled to prevent accidental changes to the LRD-
200B settings, two (2) methods are available to restore operation:
1.
Use a remote control command provided in SECTION 3 to enable the
setup buttons.
2.
Shut off power to the receiver, and then turn on power. Within 30
seconds of power being applied, press and hold both buttons to reset the
receiver to its default configuration.
Summary of Contents for LRD-200B
Page 68: ......
