background image

TECHNICAL SUPPORT INFORMATION

For technical assistance, please call:

 1-800-488-6156

 or 

1-801-299-5555

.

Before returning this thermostat to the store, please call: 

1-800-488-6156

 or 

1-801-299-5555

.

WARRANTY INFORMATION

Orbit, Inc. warrants to its customers that its products will be free 

from defects in materials and workmanship for a period of three 

years from the date of purchase.
We will replace, free of charge, the defective part or parts  

found to be defective under normal use and service for a  

period of up to three years after purchase (proof of purchase 

required). We reserve the right to inspect the defective part 

prior to replacement. 
Orbit, Inc. will not be responsible for consequential or incidental 

cost or damage caused by the product failure. Orbit, Inc. liability 

under this warranty is limited solely to the replacement or repair 

of defective parts. 
To exercise your warranty, return the unit to the dealer with a 

copy of your sales receipt.
All trade names are registered trademarks of the respective 

manufacturers listed.

www.orbitonline.com

Orbit, Inc. 

North Salt Lake, UT 84054

Model 83501

PN 83501-24 rC

Summary of Contents for Clear Comfort 83501











Reviews: