Orbit Merret OM 652UC, Instructions For Use Manual

Page: 10 / 64

10
|
INSTRUCTIONS FOR USE OM 652UC
Setting and controlling the instrument is performed by means of 5 control keys located on the front panel. With the aid of
these keys it is possble to browse through the operation menu and to select and set required values.
Symbols used in the instructions
H
Indicates the setting for given type of instrument
DEF
values preset from manufacture
4 2
symbol indicates a flashing light (symbol)
MIN
inverted triangle indicates the item that can be placed in USER menu
CONECT.
broken line indicates a dynamic item, i.e. it is displayed only in particular selection/version
after pressing the key the set value will not be stored
after pressing the key the set value will be stored
30
continues on page 30
Setting the decimal point and the minus sign
DECIMAL POINT
Its selection in the menu, upon modification of the number to be adjusted it is performed by the control key with transition
beyond the highest decade, when the decimal point starts flashing . Positioning is performed by
/
.
THE MINUS SIGN
Setting the minus sign is performed by the key on higher decade. When editing the item substraction must be made from
the current number (e.g..: 013 > , on class 100 > -87)
1 2
Relay status
ON the digit is lit
OFF the digit is not lit
OFF the digit is flashing
limits with restriction
(hysteresis, delay)
Measured value
4 INSTRUMENT SETTING