Orbit Merret OM 652UC, Instructions For Use Manual

Page: 37 / 64

INSTRUCTIONS FOR USE OM 652UC
|
37
6.1.2k Setting the display status backup H
6.1.3 External input function selection
INPUT
SERVIC.
OUTPUT.
CHANNE.
EXT.IN.
CONFIG
KEYS
TIME
VALUE
NO
DEF
MODE
TYPE C
M. STOP
LEVEL.C
M.START
M. TIME
FILTER
TYPE A
POLAR.
BACKUP
LEVEL.A
SET. V. CLEAR
BACKUP
Selection of display
status backup
- time setting menu is accessible only in the
stopwatch/timer regime
- setting display value restoration after
power failure or instrument switch-off
NO
Instrument resets itself
after every switch-on
VALUE
After switch-on the
instrument loads the
display status from the memory
TIME
Instrument downloads
„running“ time from RTC
- item accessible only with extension „Time
backup“
INPUT
SERVIC.
OUTPUT
CHANNE.
CLEAR
CONFIG
KEYS
OFF
LOCK. K.
DEF
HOLD EXT. IN.
EXT. 1
TARE
CLR. ST.
CLEAR
EXT. IN.
External input function
selection
OFF
Input is off
LOCK. K.
Auxiliary input governs
the „LOCK“ function
- the input governs the blocking of control
keys on front panel
HOLD
Auxiliary input governs
the „HOLD“ function
- the input governs the HOLD function,
which blocks all instrument functions
TARE
Auxiliary input governs
the „TARE“ function
- the TARE function is activated through the
input, only in the “Frequency” mode
CLEAR
Auxiliary input governs
the „Clear“ function
- stopwatch/counter is cleared (preset)
through the input
CLR. St.
Auxiliary input governs
the „Clear“ function
- stopwatch/counter is cleared (preset)
through the input, Stopwatcg stops
altogether
6 SETTING
profi profi