Orbit Merret OM 602RS Manual Download Page 50

Page: 50 / 88

INSTRUCTIONS FOR USE

OM 602RS

6.1.2j

Setting innitial two-symbol sequence

Protocol “UNIVERSAL”

6.1.2k

Seting the instrument address

Protocol “UNIVERSAL”

SIGNUM

DATA

CHANNE.

SERVIC.

OUTPUT.

CLEAR

EXT. IN.

CONFIG.

KEYS

INPUTS

BAUD

PROT.

STOP

START

ADDR.

MOD T.O.

REQUES.

TIMEOU.

START.2

START.1

START

Setting innitial two-
symbol sequence

START.1

Setting the first
intrductory symbol

- set directly in ASCII code
- range: 1…127
-

DEF

= 2

START.2

Setting the second
introductory symbol

- set directly in ASCII code
- range: 0…127
- if set to “0”, it will not be used
-

DEF

= 0

AD. POS.

TIMEOU.

SIGNUM

DATA

CHANNE.

SERVIC.

OUTPUT.

CLEAR

EXT. IN.

CONFIG.

KEYS

INPUTS

BAUD

PROT.

STOP

ADDR.

START

MOD T.O.

REQUES.

ADR. 2

ADR. 1

ADDR.

Setting the instrument
address

- either address in universal protocol or one

(or two) symbols of fixed value

AD. POS.

Setting the address
position

- Position of the address and other symbols

which have to have a set value. If set to 0,
the block will not be taken into account.
The block can be anywhere in the
message.

- range: 0…245
-

DEF

= 0

ADR. 1

First address symbol

- set directly in ASCII code
- range: 0…127
-

DEF

= 48

ADR. 2

Second address symbol

- set directly in ASCII code
- range: 0…127
- if set to “0”, it will not be used
-

DEF

= 49

proﬁ

SETTING

Summary of Contents for OM 602RS

























































































Search results

Summary of Contents for OM 602RS

Reviews:

Orbit Merret OM 602RS, Manual, Page: 50 / 88

Search results

Summary of Contents for OM 602RS

Reviews: