Orbit Merret OM 402PWR, Manual

Page: 69 / 84

INSTRUCTIONS FOR USE OM 402PWR | 69
6. SETTING PROFI
6.4.2 RESTORATION OF MANUFACTURE SETTING
POWER
VOLTAG.
CURREN.
RE. CAL.
RE. SET. CHANNE.
SERVIC.
OUTPUT.
MENU
RESTOR.
LANG.
INPUTS
N. PASS.
IDENT.
JOBS PERFORMED
RESTORE
CALIBRATION SETTING
cancels USER menu rights
 
deletes table of items order in USER - LIGHT menu
 
adds items from manufcture to LIGHT menu
 
deletes data stored in FLASH
 
cancels or linearization tables
 
clears tare
 
restore manufacture calibration
 
restore manufacture setting
 
CHANNE.
SERVIC.
OUTPUT.
MENU
RESTOR.
LANG.
INPUTS
N. PASS.
YES
IDENT.
RE. CAL.
RE. SET.
RESTOR. Restoration of
manufacture setting
- in the event of error setting or calibration,
manufacture setting may be restored.
RE. CAL. .
Restoration of manufacture
calibration of the instrument
- prior executing the changes you will be asked
to confirm you selection „ YES “
RE. SET. Restoration of instrument
manufacture setting
- in the event of error setting or calibration it is
possible to return to manufacture setting. Prior
to execution of changes you will be asked to
confirm your selection (
YES )
- reading manufacture calibration and primary
setting of items in menu ( DEF )
Presetting constants and evaluation
- presetting “source” for further evaluation (e.g.:
select “ VOLTAGE ” > evaluation of limits, analog,
min/max. value, etc... from “Channel U”
POWER
Setting for measurement of
power output - “Channel P”
VOLTAG.
Setting for measurement of
voltage - “Channel U”
CURREN.
Setting for measurement of
current - “Channel I”
After restoration the instrument switches off
for couple seconds
!