Orbit Merret OM 402PWR Page 2 Manual Download

Page: 2 / 84

| INSTRUCTIONS FOR USE

OM 402PWR

SAFETY INSTRUCTIONS

Please, read the enclosed safety instructions carefully and observe them!

These instruments should be safeguarded by isolated or common fuses (breakers)!

For safety information the EN 61 010-1 + A2 standard must be observed.

This instrument is not explosion-safe!

TECHNICAL DATA

Measuring instruments of the OM 402 series conform to the European regulation 89/336/EWG.

The instruments are up to the following European standards:

EN 55 022, class B

EN 61000-4-2, -4, -5, -6, -8, -9, -10, -11

Seismic capacity:

IEC 980: 1993, čl. 6

The instruments are applicable for unlimited use in agricultural and industrial areas.

CONNECTION

Supply of energy from the main line has to be isolated from the measuring leads.

ORBIT MERRET, spol. s r.o.

Vodnanska 675/30
198 00 Prague 9
Czech Republic

Tel: +420 - 281 040 200
Fax: +420 - 281 040 299
e-mail: [email protected]
www.orbit.merret.eu

Summary of Contents for OM 402PWR





















































































Search results

Summary of Contents for OM 402PWR

Reviews:

Related manuals for OM 402PWR

Brands by name

Popular brands

Orbit Merret OM 402PWR, Manual

Search results

Summary of Contents for OM 402PWR

Reviews:

Related manuals for OM 402PWR

Brands by name

Popular brands