Orbit Fitness MAX1, User Manual

Page: 15 / 17

- 14 -
ASSEMBLY INSTRUCTIONS
STEP 8
3. Assembly Arm Cable (77)
a). Run the end of Arm Cable (77) through Arm (15) and Rotational Pulley Block (18).
b). Install Pulley NO.15 (50) to Rotational Pulley Block (18), using one M10X50mm Hex
Bolt(87), two M10 Washers (97) and one M10 Nylon Nut (101).
c).Insert Steel Bushing (
￠10X￠7
) (31) into Roller (68), then attach Roller (68) to Rotational
Pulley Block (18), using one M6X45mm Hex Bolt (95), two M6 Washers (99) and one M6
Nylon Nuts (103).
d).Attach Cable U (32) to the ball end of Arm Cable (77).
e).Install Pulley NO.16 (50) to Arm (15), using one M10X50mm Hex Bolt (87), two M10
Washers (97) and one M10 Nylon Nut (101).
f).Install Pulley NO.17 (49) and Pulley Block (30) to Arm Bracket (14), using one
M10X45mm Hex Bolt (91), two M10 Washers (97) and one M10 Nylon Nut (101).
g).Install Pulley NO.18&20 (49) and two Pulley Blocks (30) to Arm Support Frame (13),
using one M10X110mm Hex Bolt (82), two M10 Washers (97) and one M10 Nylon Nut
(101).
h).Install Pulley NO.19 (49) to Single Pulley U (29), using one M10X40mm Hex Bolt (88),
two M10 Washers (97) and one M10 Nylon Nut (101).
i).Install Pulley NO.21 (49) and Pulley Block (30) to Arm Bracket (14), using one
M10X45mm Hex Bolt (91), two M10 Washers (97) and one M10 Nylon Nut (101).
j).Run the other end of Arm Cable (77) through Arm (15) and Rotational Pulley Block (18).
k). Install Pulley NO.22 (50) to Arm (15), using one M10X50mm Hex Bolt (87), two M10
Washers (97) and one M10 Nylon Nut (101).
l).Install Pulley NO.23 (50) to Rotational Pulley Block (18), using one M10X50mm Hex
Bolt(87), two M10 Washers (97) and one M10 Nylon Nut (101).
m). Insert Steel Bushing (
￠10X￠7
) (31) into Roller (68), then attach Roller (68) to
Rotational Pulley Block (18), using one M6X45mm Hex Bolt (95), two M6 Washers (99)
and one M6Nylon Nut (103).
n).Attach Cable U (32) to the ball end of Arm Cable (77).
o).Attach two Strap Handles (69) to the Cable U (32), using two M10X35mm Hex Bolts (89),
four M10 Washers (97), two M10 Nylon Nuts (101) and two Pothooks (48).