Orbit baby G5, User Manual

Page: 41 / 88

I
nstalling the Base: A
With Vehicle Seat Belt
The car seat base should be installed
without the car seat attached (Photo A).
Follow instructions in the Rotating and
Removing the Car Seat from the Car Seat
Base to remove the car seat from the car
seat base.
CHECK that the car seat base StrongArm is
set to zero (Photo B). If not, turn the
StrongArm knob counterclockwise until the
zero line is visible.
If the LATCH/UAS belt is routed through the
belt guides, remove from belt guides. (Note:
The belt is permanently routed behind the
lockoff clamp). Store the LATCH/UAS
connectors in their storage location when
they are not in use (Photo C). Each connec-
tor will click securely into its own storage slot.
If the vehicle seat back is adjustable,
1.
2.
3.
4.
Before you install the car seat base in your vehicle,
make sure the vehicle is parked on level ground.
A
A
A
B
C
Installing the Car Seat Base and Car Seat
41