Orbit baby G5, User Manual

Page: 38 / 88

Attach both LATCH/UAS connectors to their
corresponding vehicle anchorages. With the
connector oriented with logo facing outward,
push it straight onto the metal bar until you
hear and feel a
CLICK (Photo J).
Pull out on each LATCH/UAS connector to be
sure it is locked onto the vehicle anchorage.
Tighten the LATCH/UAS belt around the car
seat base by pulling the LATCH/UAS belt
loop to remove the slack (Photo K) from both
sides of the lockoff clamp. Make sure the car
seat base is not loose.
Turn the StrongArm knob at the front of the
car seat base clockwise to activate the
StrongArm mechanism (Photo L).
As you’re turning the knob, the
StrongArm mechanism is amplifying
your strength and tightening the car
seat base into the vehicle.
Each installation varies slightly, but
typically the knob can turn 10 full
9.
10.
11.
12.
Installing the Car Seat Base :
With LATCH/UAS
cont’d
A
A
J
K
L
Installing the Car Seat Base and Car Seat
38