Orbit baby G3, Instruction Manual

Page: 32 / 122

32 -
Instruction Manual - Car Seat + Isofix Base
Group 0+
NOTICE
•
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No.
44, 04 series of amendments for general use in vehicles with ISOFIX anchorages
systems that conforms to ECE Regulation No. 16.
•
It will fit vehicles with positions approved as ISOFIX positions (as detailed in the
vehicle handbook), depending on the category of the child seat and of the fixture.
•
The mass group and the ISOFIX size class for which the device is intended is D.
•
This Child Restraint is classified for Semi-universal use and is suitable for fixing
into the seat positions of the following cars listed in the separate Orbit Baby Car Fit
Guide. Seat positions in other cars may also be suitable to accept the child restraint.
If in doubt, consult either the child restraint manufacturer or the retailer.
•
Always give priority to fitting in the rear seat positions. If you are unsure where to
install this car seat refer to your vehicle owner’s manual for recommended seat
locations or for specific instructions about child restraint use, or contact the vehicle
manufacturer for guidance.