Orbit baby Double Stroller Kit, Manual

Page: 18 / 32

10 – ENGLISH
– Manual Text Booklet – Orbit Baby Double Stroller Kit
⃞
Check that the Double Stroller Kit SmartHub Attachment is fully locked into the stroller frame by
letting go of the release lever and pulling back on the attachment. You should not see the red
warning triangles or be able to remove the attachment.
Attaching the ShadePad
⃞
Undo the hook and loop fasteners on the backside of the ShadePad
Ⓐ
. Grasp the ShadePad by
its sides and slide it over the Unibar while pulling it wide open, until the bottom of the ShadePad
lines up with the end of the foam grip. Ensure that the clear window faces upward, the flap with the
two snaps faces the Unibar, and the ShadePad is only on the foam of the Unibar.
⃞
Attach the strips of hook and loop fastener on the underside of the ShadePad. Make sure that in
doing so the upper two elastic bands remain covered.
⃞
Snap both corners of the ShadePad to the water bottle tray
Ⓙ
.
Assembly of the Orbit Baby Double Stroller Kit is now complete.