Orbit baby Double Stroller Kit, Manual

Page: 15 / 32

Manual Text Booklet – Orbit Baby Double Stroller Kit –
ENGLISH – 7
◦
Use caution when pushing stroller on uneven terrain or hills.
◦
Always lock the parking brake when the stroller is stopped.
◦
NEVER leave the stroller unattended on a hill or incline even when the stroller brake is
locked.
⚠
WARNING
⚠
AVOID PINCH INJURY:
◦
Keep fingers clear of stroller when folding and unfolding the stroller.
◦
Keep your children's hands and fingers clear of moving parts when adjusting the stroller
seat or Unibar.
◦
Keep your children's arms, legs and feet clear when rotating seats and adjustng seat
recline.
Getting Started
Remove all the parts from the box. You should have received a Double Stroller Kit SmartHub
Attachment, two (2) Double Stroller Kit SmartHub Attachment wheels, a Unibar, two (2) stroller frame
leg connectors, a set of stroller rear wheel disks, and a ShadePad. These parts are illustrated in your
manual foldout. Note that the fasteners needed for installation are loosely screwed into the various
parts to help you keep track of where they go. You will need to remove these fasteners before
installing each part.
Removing your old handlebars
⃞
Start with your stroller frame open and erect. Completely unscrew both Philip screws
Ⓑ
under
the Orbit Baby G3 Stroller water bottle tray.
⃞
Remove the old water bottle tray by pulling up firmly.
⃞
Remove the screw on the other side in the same manner. Push down on the left handlebar button
and pull up on the handlebar to remove it from the stroller frame. Repeat with right handlebar.