Orbegozo TES 4650, Instruction Manual

Page: 34 / 79

TES 4650
34
ERROR INDICATORS
SYMBOL CAUSE CORRECTION
The course of inflating
appears error.
Wrap the cuff correctly and tightly.
Ensure the connection is close between the air plug and the
unit.
Inflate over again after ensuring.
When measurement
fails.
Do not move your arm and body, and keep quiet.
Measure over again according to correct way.
When the batteries
power are too low. Replace all of the worn batteries
with new ones.
ELIMINATE FAULT
PROBLEM CAUSES AND SOLUTIONS
No power. Replace all the worn batteries with 4 new ones.
No display appears on the display screen.
Check the battery installation for proper placement of the batteries
polarities.
Measurement values appear too high or
too low.
Blood pressure varies constantly. Many factors including stress, time
of day, how you wrap the cuff, may affect your blood pressure.
Review the sections "Proper Use of the Arm Cuff" and "Take a
Measurement".
CARE AND MAINTENANCE
Care
−
Keep the unit in the storage case when not in use.
−
Clean the unit with a soft dry cloth.
−
Do not use any abrasive or volatile cleaners.
−
Never immerse the unit or any components in water.
−
If needed, please use ultraviolet radiation for disinfection.
−
Avoid subjecting the monitor to strong shocks or vibrations, such as dropping the unit on the floor.